Cruisers
1973 Yamaha DT 360
This was a fun small job that I did for the guy who bought my Triumph Street Triple R (which I now regret selling!). He is doing a cafe style semi-restoration on the 360 and so we needed to paint Read more…
This was a fun small job that I did for the guy who bought my Triumph Street Triple R (which I now regret selling!). He is doing a cafe style semi-restoration on the 360 and so we needed to paint Read more…
Well, the paint is all finished on the cafe style bodywork. It really looks great. I’m looking forward to seeing them on the bike. We still have a set of full race fairings to paint that will be used with Read more…
Here are a few pictures of the progress- the red is on and the graphics are on. The Hejira decals that Tapeworks.com made for me are far better than the original that we had to scan and work off of. Read more…
A few pictures as I get ready to put the red on… here are the parts with the panels taped up- so, what is under the tape is the polar white we sprayed on a few days ago. Laying out Read more…
We’ve made some good progress- after some final sanding and finishing, the epoxy primer was applied and then we went back and touched up some areas with spot filler and block sanded everything. One of the biggest decisions to make Read more…
The filler and sanding is more involved than it looks… you need to put the layers on thin, then sand, then another layer until you have the shape and contour you want. Lots of hand sanding and block sanding. It Read more…
The upper and all the fiberglass is media blasted and as you can see in pretty tough shape. The upper has been patched together in a previous life and all the edges, corners and gel coat are very nicked, chipped, Read more…
Well, I’ve media blasted all the parts and gotten down to the aluminum on the tank and the gel coat on the fiberglass. The tank was in pretty rough shape with several large dents that had just been filled with Read more…
If you’ve never heard of Hejira before, don’t feel bad. I know bikes pretty well and I had not heard of them until one of my clients called me and said he had bought one in England and wanted to Read more…
Here are a few pictures of the FZ1 that I painted in that beautiful Lamborghini Orange Pearl… The color and shade change dramatically depending on sun and shading. The logos and graphics are done in 3M carbon fiber vinyl and Read more…
Working on a 94 Ducati 916 that had some fairing damage after some tabs broke from old age and stress and the wind tore the panels off the bike as he was riding… Matching the color on a 19 year Read more…
All cleared and buffed. Looks awesome- cameras are really bad at showing metallic and pearls but you can get an idea form the pictures how pretty it is. The pearl changes shades and colors depending on how the light hits Read more…
Today was the orange day… the base color is a Lamborghini orange and then I custom mixed a pearl to go on top. The pictures are not very accurate due to the florescent lights- the color is more orange than Read more…
This bike has an interesting history. The current owner bought it a few months ago with only 250 miles on it. It was a “barn find” but had some cosmetic damage- dented tank and scratched fairings. Since it needed to Read more…
Here are a few more photos from the Barber Vintage Festival… There were some awesome bikes there- This SL350 is just like the bike that my friend Jerry and I restored a few years back.
Not much I can say about this except WOW. Click through to watch the video. Al Lamb’s 265MPH Bonneville Run – *AMA/ FIM Fastest Motorcycle In The World – Sit On (Average Record Speed 263mph) 2012 from COLORFULgrey Zach Settewongse Read more…
The 8th annual vintage festival concluded today and by all appearances, it was a great success. The weather was great all weekend and the crowds were huge. My only big complaint was that after paying for admission, you had to Read more…
Don’t’ miss this years Vintage Festival at Barber Motorsports Park in Birmingham, AL if you are anywhere close enough to come. This is an awesome yearly event with shows, exhibits, racing and great cool fall weather. The swap meet alone Read more…
Actually, I’m not sure what bike these are off of… originally grey and the owner wants them green and black to match his new bodywork. So, I am obliging him.
I’m not currently working on any bikes but I am working on a 40 year old cedar strip canoe that has been in the family forever. It was made by Sundance Canoes in Gravenhurst, ON which is no longer in Read more…
I just finished clearing the helmet I painted to match the Lions Hayabusa I did last month. Obviously the same scheme with the Ruff Riders/Lions logo on the side. It’s not a high quality helmet but I think it is Read more…
The VFR is finished and looks great. The wings on the fairings are pretty ghostly- they are only really noticeable in direct light and even then you need to look for them. We also put red LED’s inside the fairings Read more…
The upper is all reassembled and installed. Hopefully I will have finished pictures by the end of the day.
Kawasaki has issued a recall for 2011 and 2012 ZX10R’s due to the possibility of an oil leak which could get on the rear tire. Oil on tires is never a good thing… Here’s the info from NHTSA- BTW, I Read more…
The VFR is progressing- the wings are on the side panels and tank and everything is clear coated. The wings are just one shade lighter than the panel color so they are really ghost wings. At night, they won’t be Read more…
I sprayed the base coat on today- after several days of bodywork, sanding, more sanding, priming, more sanding, etc. As you can see from the picture of the turn signal opening, it is really critical to get every edge and Read more…
This happened during a closed course rally in W. Virginia. The dude was pretty tough to get right back on the bike and continue the race. Deer are a huge problem for motorcyclists who ride on rural roads. I’ve almost Read more…
Here is the first photo I’ve seen of the bike all assembled with the wheels painted. It’s a great color that changes shades as the angle and sun change. I should get some more pictures soon…
I’ve just started on a 2003 VFR800 that was lightly crashed when he ran off the road. Since every panel on the bike was damaged, it would have been totaled by the insurance company. But we are going to fix Read more…
This is one of those entertaining videos that really means nothing. Kinda like the supercar vs. fighter jet match-ups. But it is entertaining- and a bit too long for a simple drag race.
I found this video on YouTube… this is the bike that is the inspiration for the R6 I just finished. Great video of KR riding a demo lap at Laguna before the MotoGP race last year.
Here are a couple of shots of the bike all finished. It really looks better in person since you can see all the detail that pictures tend to miss. The scheme is inspired by the 84 Yamaha RZ350 Kenny Roberts Read more…
I’m currently working on a Blue/Silver CBR600RR that got dropped and and needed some paint work. The owner wanted a complete color change to all black so that is what we are doing. Here are a couple before/after shots of Read more…
Here are a couple of shots of the Hayabusa taken on a cell phone… Why they didn’t roll it outside and take a couple of decent pictures is beyond me but it is supposedly scheduled for another photo shoot in Read more…
More photos are coming tomorrow but here are a couple of the tank and seat cowl ready to install…
I’m currently working on a Hayabusa for client who used to play for the Detroit Lions. The black/silver/blue scheme is right off their uniforms. Here are a few shots of the panels in basecoat with the graphics applied. The graphics Read more…
Well, here it is almost all reassembled. I’m still waiting on the windscreen and I need to fabricate a rear plate bracket but the scheme looks great.I’ll post some more pictures when it is all finished.
Here is a quick picture of the upper in the sun so you can see the yellow pearl. The base color is Viper yellow but I mixed a pearl coat to go on top that has diamond white, orange and Read more…
To get a really slick “dipped in glass” look, you need at least 4 coats of clear. So, I wet sanded the tank and upper with 400 grit and sprayed a couple more coats of clear on. Next, it will Read more…
Well, the bodywork is all cleared and looks great. You can’t see it in this picture but the yellow pearl I mixed up looks awesome in the sunlight. Next up is some wet sanding and buffing and then final assembly.
Here are a few of pictures of the bodywork with the graphics installed and the tank stripe painted… it’s going to be a cool looking bike.
I’ve never promoted it but we do have a FB page, so if you have a second, head over and “LIKE” us!
Even after filler and hand sanding you will find some small defects that need to be spot puttied and resanded. After that, we are ready to put the base color coat on- in this case I’m using Viper Yellow. You Read more…
So, I’ve been working on this 08 R6 that needed a complete repaint… It was originally blue but had been painted solid black after a crash- and done very poorly, probably by a car shop. I’ve found that while car Read more…
This article over at MSNBC spotlights a big problem for US motorcyclists. With recreational and commuter use on the rise, motorcycle deaths and injuries are a big problem for everyone involved- the gov’t, manufacturers and of course the families of Read more…
Here are a few quick shots of the bodywork stuck on the bike that I took with my phone so we could get a feel for what it will look like. As you can see, the side fairings have a Read more…
AUDI AG acquires sports motorcycle manufacturer Ducati Motor Holding S.p.A. – Chairman Rupert Stadler: “As a sporty, global premium brand, Ducati is an excellent fit for Audi.” – Third pillar for AUDI AG in Italy – Ducati a leading player Read more…
Well, the clear coat is on and the panels look awesome. The color scheme with the lighter Suzuki blue outlined in red looks perfect on a 70’s vintage bike. I should be ready to put the panels on in a Read more…