Hejira Update- 7

Well, the paint is all finished on the cafe style bodywork. It really looks great. I’m looking forward to seeing them on the bike. We still have a set of full race fairings to paint that will be used with the same tank and tail. So, they will also be Read more…

Hejira Update- 6

Here are a few pictures of the progress- the red is on and the graphics are on. The Hejira decals that Tapeworks.com made for me are far better than the original that we had to scan and work off of. It is going to look great. The red/white/gold is a Read more…

Hejira Update- 5

A few pictures as I get ready to put the red on… here are the parts with the panels taped up- so, what is under the tape is the polar white we sprayed on a few days ago. Laying out and striping panels is pretty time consuming. Lots of hours Read more…

Hejira Update- 4

We’ve made some good progress- after some final sanding and finishing, the epoxy primer was applied and then we went back and touched up some areas with spot filler and block sanded everything. One of the biggest decisions to make on a 50 year old bike that has a hand Read more…

Hejira Update- 3

The filler and sanding is more involved than it looks… you need to put the layers on thin, then sand, then another layer until you have the shape and contour you want. Lots of hand sanding and block sanding. It is pretty time consuming. Here, we are getting close to Read more…

Hejira Update- 2

The upper and all the fiberglass is media blasted and as you can see in pretty tough shape. The upper has been patched together in a previous life and all the edges, corners and gel coat are very nicked, chipped, etc. I’ve laid new glass in certain areas to reinforce Read more…

Hejira Update- 1

Well, I’ve media blasted all the parts and gotten down to the aluminum on the tank and the gel coat on the fiberglass. The tank was in pretty rough shape with several large dents that had just been filled with (lots) bondo. So I cut the bottom out and pounded Read more…

Ducati 916 repairs

Working on a 94 Ducati 916 that had some fairing damage after some tabs broke from old age and stress and the wind tore the panels off the bike as he was riding… Matching the color on a 19 year old bike can be a challenge since it fades differently Read more…

2004 Yamaha FZ1- Orange!!

All cleared and buffed. Looks awesome- cameras are really bad at showing metallic and pearls but you can get an idea form the pictures how pretty it is. The pearl changes shades and colors depending on how the light hits it. I should get some finished shots after the owner Read more…

265 mph Honda CBR1000- awesome

Not much I can say about this except WOW. Click through to watch the video. Al Lamb’s 265MPH Bonneville Run – *AMA/ FIM Fastest Motorcycle In The World – Sit On (Average Record Speed 263mph) 2012 from COLORFULgrey Zach Settewongse on Vimeo.

Honda VFR800 finished!

The VFR is finished and looks great. The wings on the fairings are pretty ghostly- they are only really noticeable in direct light and even then you need to look for them. We also put red LED’s inside the fairings to light it up at night. VFR’s are one of Read more…

Honda VFR800 update-2

The VFR is progressing- the wings are on the side panels and tank and everything is clear coated. The wings are just one shade lighter than the panel color so they are really ghost wings. At night, they won’t be visible at all. We will put some LED lights inside Read more…

2003 Honda VFR800 update

I sprayed the base coat on today- after several days of bodywork, sanding, more sanding, priming, more sanding, etc. As you can see from the picture of the turn signal opening, it is really critical to get every edge and corner painted or you will have the original color peeking Read more…

Motorcycle vs. deer

This happened during a closed course rally in W. Virginia. The dude was pretty tough to get right back on the bike and continue the race. Deer are a huge problem for motorcyclists who ride on rural roads. I’ve almost hit a couple here in Georgia and I’ll admit, the Read more…

Honda CBR600RR paint

I’m currently working on a Blue/Silver CBR600RR that got dropped and and needed some paint work. The owner wanted a complete color change to all black so that is what we are doing. Here are a couple before/after shots of the body work with the black base coat. Base coats Read more…

Custom Suzuki Hayabusa

I’m currently working on a Hayabusa for  client who used to play for the Detroit Lions. The black/silver/blue scheme is right off their uniforms. Here are a few shots of the panels in basecoat with the graphics applied. The graphics were custom made by Tapeworks who I highly recommend if Read more…

Yamaha R6 update 5-

Well, here it is almost all reassembled. I’m still waiting on the windscreen and I need to fabricate a rear plate bracket but the scheme looks great.I’ll post some more pictures when it is all finished.

Yamaha R6 update 4-

Here is a quick picture of the upper in the sun so you can see the yellow pearl. The base color is Viper yellow but I mixed a pearl coat to go on top that has diamond white, orange and red pearls in it. With all the different pearls, it Read more…

Yamaha R6 update 3-

To get a really slick “dipped in glass” look, you need at least 4 coats of clear. So, I wet sanded the tank and upper with 400 grit and sprayed a couple more coats of clear on. Next, it will get wet sanded with 2000 grit, then 3000 grit and Read more…

cleared gas tank

Yamaha R6 update-2

Well, the bodywork is all cleared and looks great. You can’t see it in this picture but the yellow pearl I mixed up looks awesome in the sunlight. Next up is some wet sanding and buffing and then final assembly.

Audi and Ducati

Audi buys Ducati- Press Release

AUDI AG acquires sports motorcycle manufacturer Ducati Motor Holding S.p.A. – Chairman Rupert Stadler: “As a sporty, global premium brand, Ducati is an excellent fit for Audi.” – Third pillar for AUDI AG in Italy – Ducati a leading player in engine technology and lightweight construction Ingolstadt/Bologna, April 18, 2012 Read more…