Yamaha RZ500 Project- Part 10

After lots of taping and masking, I sprayed the blue base coat on for the stripes. One thing I found is that while there are all sorts of 1/4 and 1/2 in masking tapes available, there is no 3/8 in… at least not that I could find. So I had to “make” it by using the 1/4 and 1/8 3M Fine Line vinyl tape since all of the stripes are 3/8.

Next, I need to touch up a few spots on the red and blue base and then it will get 3 coats of high solids clear. It is going to be a very cool bike.